BMW 5 Series E39

since 1996-2001 release

Repair and operation of the car


BMW E39
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Cooling systems, heating
- Power supply system and release
   - Power supply system
      Economy of fuel at the movement
      Rules of respect for purity during the work with fuel system
      Check of the relay of the fuel pump
      Check of productivity of the fuel pump
      Removal and installation of the sensor of a reserve of fuel and fuel pump
      Removal and installation of the case of the air filter and measuring instrument of mass of air
   + System of injection of the petrol engine
   + Power supply system of the diesel engine
   + System of production of the fulfilled gases
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment
+ System of onboard diagnostics

64a8d164


Rules of respect for purity during the work with fuel system

During the work with fuel system it is necessary to follow the following rules of purity:
   Carefully clear connections and the places adjoining to them before opening.
   b) Stack the removed details on a pure lining and close. Apply for this purpose polyethylene or paper. Do not apply for this purpose fibrous fabric!
   c) Carefully close open details or put technological caps if repair lasts some time.
   d) Establish into place only pure details.
   e) Take out spare parts from packing only just before installation.
   f) Do not apply details which have no packing (for example, stored in a toolbox).
   g) At open fuel system do not apply whenever possible compressed air. Whenever possible do not move at the same time the car.
   h) Do not allow hit of diesel fuel on cooling system hoses since it can cause their damage. At once wipe fuel a damp rag.