BMW 5 Series E39

since 1996-2001 release

Repair and operation of the car



BMW E39
+ Introduction
+ Maintenance instruction
- Current leaving and service
   Schedule of routine maintenance
   Introduction
   Current leaving
   General information on control
   Check of levels of liquids
   Check of a condition of tires and pressure in them
   Replacement of motive oil and oil filter
   Check and adjustment of turns of idling of the engine and SO level
   Replacement of an element of the air filter
   Replacement of the filter of air of salon
   Check of the brake system
   Visual control of the bottom and elements of a body
   Check of level of liquid of system of hydrostrengthening of a wheel
   Wheels and tires. Rotation, replacement, balancing and leaving. Snow chains. Sekretka of wheels. Elimination of trembling of a wheel
   Check of a state and replacement of hoses of a motive compartment
   Check of a condition of driving belts
   Check of a condition of the battery, care of it and charging. Replacement of a battery DU brelka
   Check and replacement of spark plugs
   Check of functioning of fuel system. Winter operation of the Diesel
   Check of functioning of the cooling system
   Check of a condition of system of production of the fulfilled gases
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Lubricant of locking devices
   Visual check of seat belts
   Check of a state and replacement of brushes of screen wipers
   Replacement of brake fluid
   Cooling system liquid replacement. Check of frost resistance of a cooler. Visual check of the cooling system
   Removal of a sediment, replacement of the fuel filter. Removal of air from fuel system of the diesel engine
   Replacement of gearbox oil of a manual box of gear shifting
   Replacement of lubricant liquid of differential
   Check of thickness of the conducted clutch plate
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment
+ System of onboard diagnostics


64a8d164


Replacement of lubricant liquid of differential

Necessary tool and spare parts:
   Face keys of 10 and 12 mm for jellied and drain traffic jams.
   b) Two aluminum sealing rings of A22 x 27

 PERFORMANCE ORDER

1. Before work let's the car pass several kilometers to warm up lubricant liquid of differential, then the car and reliably establish to a poddomkratta it on support.
2 Place the drain capacity, rags, newspapers and a face key under the car. As lubricant liquid will be hotter, put on rubber gloves to prevent burns.
3 Remove a stopper of a bulk mouth from differential; it is top of two stoppers.

2. Turn out a stopper of a jellied mouth (1) a face key. Address an accompanying illustration.
5. If a small amount of oil, level normal pours out and RKPP is tight. Otherwise check a finger whether oil level reaches the lower edge.

At considerable leak of oil it is necessary to establish the reason and to eliminate it.

Having established capacity under differential, weaken a drain stopper (2); it is lower of two stoppers.

3. Carefully turn off a drain stopper, you will not remove it from a casing yet.
7 Let's all liquid flow down in drain capacity. The drain stopper is magnetized and attracts to itself metal shaving. Wipe shaving from a stopper. Wrap a stopper with a new sealing ring the moment of 50 Nanometers.
8 you stanovit a drain stopper and reliably tighten it.
9 Fill differential with lubricant liquid.

RKPP oil rather dense. Therefore do not fill in a lot of oil at once. Take a break and substitute capacity for collecting the poured oil.

10 Establish a bulk stopper with a new sealing ring and reliably tighten its moment 50 Nanometers.
11 Lower the car on the earth. Having passed the first several kilometers, check whether the drain stopper proceeds.