Replacement of gearbox oil of a manual box of gear shifting
The tools necessary for this work include support for maintenance of the car in the lifted state, face key for an otdavaniye of a drain stopper, drain capacity, newspapers and pure rags. It is also necessary to prepare necessary amount of gearbox oil (address the Section "Types and Volumes of the Applied Lubricants and Liquids" of Specifications).
Replacement of RKPP oil is made each 80 000 km within carrying out maintenance. In intervals it is necessary to check RKPP for tightness and to control oil level in it. Level has to reach the lower edge of a jellied mouth.
Gearbox oil merges in a hot state (i.e. right after a trip on the car); from hot oil pollution are removed easier. It is better to perform works in rubber gloves.
|
| 1. The car and reliably establish to Poddomkratta it on support. Try to install the car as it is possible more exactly. Remove the lower guard of a motive compartment, address the Section Removal and installation of the lower guard of a motive compartment.
2. Place the necessary equipment under the car, trying not to concern hot components of final system. |
3. Turn out a stopper of a jellied mouth (1) on RKPP. Address an accompanying illustration.
4. Substitute capacity and turn out a drain stopper (2) under RKPP. |
|
5. Let's oil flow out completely. Carefully clear a drain stopper, then establish it and reliably tighten.
| | Do not pour out oil together with household waste at all. |
|
6. Screw a drain stopper and tighten its moment 50 Nanometers.
7. Fill transmission with new oil, then establish a cover of a bulk mouth and reliably tighten it.
8. Lower the car on the earth. Establish the lower guard of the motive compartment Having passed the first several kilometers, check whether the drain stopper proceeds.
| | You watch to pouring oil higher than the level of the lower edge of a jellied mouth. |
9. Tighten a stopper of a jellied mouth the moment given in Specifications. |
|
|
