BMW 5 Series E39

1. Lower a steering column completely down and put forward.

2. Turn out three screws of fastening of the lower facing of a steering column.

3. Press on the top facing of a steering column on both sides inside in the place shown on an accompanying illustration and pull the lower facing down.

4. Turn out the screw (shooter on an accompanying illustration) and remove the top facing of a steering column.

5. Squeeze brackets above and below and take out the switch.

6. Squeeze brackets and a rasstykuyta shtekerny connection.

1. Join shtekerny connection and record it.
2. Insert into place the switch and fix it.
3. Fix the lower facing of a steering column by three screws.
4. If it is necessary, replace a nut of fastening of the top facing of a steering column.

5. Establish the top part and record it. At the same time enter a hook (1) into reception openings (2).

6. Press the top part of a sidewall of a steering wheel down and record sideways in the lower part.
7. Fix by screws the top part.
8. Establish a steering column in normal situation.