BMW 5 Series E39

1. Take out a lamp of internal lighting by means of the small screw-driver. Rasstykuyte shtekerny connection.

2. Remove the screw-driver a peak. Rasstykuyte shtekerny connection of the switch.

3. Turn out Torx screws a head of 25 mm.

4. Take out the electric drive of the panel and a rasstykuyta shtekerny connection.

1. Insert the electric drive of the panel and attach it. Fix it by two short screws (2) and one long (1) moment of 3 Nanometers. Use surely new screws. If there are no new screws, old grease with means for LOCTITE 270 fixing.

2. Join the switch plug, establish into place a cover.
3. Join shtekerny connection of a lamp of internal lighting and put it into place.

1. Install the panel in the provision of rise, press and hold the panel switch in the direction of "Hebestellung" ("The provision of rise").
2. Hold the switch in the provision of rise during 5 with:
   after each switching off of food or
   b) after adjustment of the panel.
3. Hold the switch in the provision of rise during 20 with:
   after malfunctions in work
   b) electric drive detachments
   c) works with hummock drives.
4. Initialization is considered finished if the switch is once again pressed in the Provision of Rise direction.