BMW 5 Series E39

since 1996-2001 release

Repair and operation of the car



BMW E39
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Security measures during the work with a safety cushion
      Removal and installation of a steering wheel
      Removal and installation of the top facing of a steering column
      Removal and installation of a tip of steering draft
      Removal and installation of steering draft
      Fastening of a hydraulic pump
      Removal of air and filling of a hydraulic system of the power steering with liquid
      Check and adjustment of angles of installation of wheels
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment
+ System of onboard diagnostics




Fastening of a hydraulic pump

1 — a hydraulic pump
2 — the oil heater
3 — the return pipeline
4 — the steering mechanism
5 — the pressure head pipeline

6 — a hollow bolt
7 — the tank
8 — the soaking-up hose
D — a sealing ring

Fastening of a hydraulic pump is presented on an accompanying illustration.

1 — a pulley
2 — the holder
3 — a hydraulic pump
4 — a bolt of M8 x 95
5 — a bolt of M8 x 65


At a support detachment from the block of cylinders remember situation and write down number of remote washers to put them on the former place. Moment of an inhaling of 20 Nanometers.









64a8d164 64a8d164 64a8d164 64a8d164