BMW 5 Series E39

since 1996-2001 release

Repair and operation of the car



BMW E39
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
- Coupling and power shafts
   + Coupling
   + Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment
+ System of onboard diagnostics


64a8d164


Coupling and power shafts

Specifications

Separate characteristics are provided also in the text of the Head and in case of obligation of their performance are highlighted in bold type

Coupling

Characteristic

Value

Type

One-disk dry
with a diaphragm spring

Minimum thickness of an overlay of a clutch plate

7.5 mm

Power shafts

Characteristic

Value

Amount of CV JOINT lubricant

 

Internal hinge

 

      •  model 520 i, 525tds

70 g

      •  model 523 i, 528i, 530i, 540i

85 g

External hinge

 

      •  model 520 i, 525tds

80 g

      •  model 523 i, 528i, 530i, 540i

100 g

Efforts of tightening of threaded connections

The moments of an inhaling of fixture are given in the text of the Head and on some illyustratsiyakh*.
* The moments of an inhaling highlighted in the text in bold type are subject to exact observance; efforts which are not highlighted in bold type are given only approximately

Characteristic

Value

Reducer of a back axis to a beam in front

180 Nanometer

Reducer of a back axis to a beam behind

105 Nanometer

Bolts of fastening of cardan and driving shaft to a reducer of the back bridge

 

      •  A bolt with an internal polyhedron of M10

85 Nanometer

      •  M10 bolt with a gear fillet (bolts and washers are replaced)

95 Nanometer

      •  M12 bolt

110 Nanometer

      •  Bolt Torx M10

85 Nanometer

              ••  with the gear basis of M8

65 Nanometer

              ••  with the gear basis of M10

100 Nanometer

              ••  with the gear basis of M12

160 Nanometer

Nave nut with a fillet

300 Nanometer